m menu image  m home m cart
C-Scope MXT4 TransmitterC-Scope MXT4 Transmitter
Click to enlarge

C-Scope MXT4 Transmitter Part Number: 800-MXT4

£900.00 Ex VAT
£1,080.00 Inc VAT

Add to Cart:



Details

  • Model: 800-MXT4
  • Shipping Weight: 7kgs
  • Manufactured by: C-Scope

Description

The C.Scope MXT4 Transmitter is designed for use alongside an MXL4 Locator. It enables a far more flexible approach to pipe and cable location enabling the operator to accurately detect, pinpoint, trace and identify the widest range of pipes and cables.

MULTI-FREQUENCY
The MXT4 Transmitter now has a greater range of transmitting frequencies allowing improved long distance tracing and utility identification, even on the most congested of sites. A range of frequencies from 512/640Hz up to 131kHz and including the simultaneous dual-frequency 33kHz and 131kHz signal output is ideal for maximising the number of buried services that can be energised and then detected. The MXL4 can apply these frequency signals without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.

THREE SIGNAL APPLICATION TECHNIQUES
The MXT4 offers three alternative ways to apply a Signal Generator signal:

Direct Connection allows specific pipes or cables to be individually traced, identified and their depths measured. The use of Signal Clamps, Signal Injectors and Direct Connection leads make this mode the most effective method for pinpointing pipes and cables.

If it is difficult or inconvenient to use Direct Connection, then the Wraparound technique can be utilised to successfully energise a street or car park lighting cable.

Induction allows the Signal Generator to induce a detectable and traceable signal to previously unknown, undetected or inaccessible underground metal pipes or cables.

HIGH POWER SIGNAL
The MXT4’s fully adjustable One Watt Power Output means that deeper pipes and cables can be effectively energised and then traced over ever longer distances.

It also features a FOUR position power level adjustment so the operator has total control of how much power is in use and when.

PULSED/CONTINUOUS SIGNAL OUTPUT
A Pulsed or Continuous signal output allows operators to switch to the Pulsed Mode at the push of a button in high interference situations and keep on tracing. The MXT4 has a clear audible signal output to indicate when it is in operation.

A useful in-built audio mute control is also included.

DATA LOGGING
To compliment and support in-built data logging on the MXL4 Locator, the MXT4 Transmitter also has full data logging capability. A years worth of data can be stored, in normal usage, on both the Locator and Transmitter. This can be conveniently transferred at any time via a USB cable to a PC for analysis.

CALIBRATION
The MXT4 Transmitters do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.

AUTOMATIC DAILY SELF TEST (ADST)
The MXT4 Transmitters perform a comprehensive Automatic Daily Self Test (ADST).

At the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.

The result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.

PRODUCT VALIDATION CERTIFICATION
These test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.

C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.

HIGH RESOLUTION BACKLIT DIGITAL DISPLAY
The MXT4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates frequency and functions selected, power level, connection quality and battery condition. It also displays the Automatic Daily Self Test results.

ROBUST AND DURABLE CONSTRUCTION
The MXT4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.

ACCESSORY TRAY
The MXT4 Transmitter has a large detachable accessory tray as its base. It can house not only the standard accessories (Direct Connection Leads, Earth Stake, Connection Magnets, 10m Auxiliary Earth Lead) and the Instruction Manual but also many of the optional extras such as Signal Clamps, Sondes and Signal Injectors.

OVERVIEW
One Watt 4-level adjustable Power Output
Six Signal Outputs:
Simultaneous 33+131kHz
512Hz Signal
640Hz Signal
8kHz Signal
33kHz Signal
131kHz
Pulsed or Continuous Output Signal
Three Signal Application Techniques:
Direct Connection / Wraparound / Induction
Automatic Daily Self Test
Data Logging of all Transmitter activity
Data Transfer by USB
High resolution Liquid Crystal Display
No periodic Calibration required
Product Validation Certificate available
In-built Accessory Tray
Network Rail Approved

SPECIFICATION
Product name
MXT4 Transmitter

Part No.
MXT4-D

Controls
All operation is by push button control as follows:

On/Off
Power Level: Cycles through four available power levels
Frequency: cycles through six available output frequencies
Pulse/Continuous Output: toggles between pulse or continuous output using one push button
Audio Output: toggles between loud, muted and silent audio output using one push button
Audio Indications

Audio Feedback on button push
Audio pitch drops with increasing load current in Connected Mode
Audio pitch changes with power level in Induced Mode
Audio output pulses to indicate Pulsed Mode
Low battery indicated by interrupted Audio and output signal
Visual Indication
Multi-segment Liquid Crystal Display indicating:

Output Frequency
Pulse Mode
Continuous Mode
Battery Condition
Output Level (bargraph)
Speaker Mute
Self Test Result
Data Connector
Standard USB Mini B connector. USB 2.0 Compatible

Self Test
Automatic Daily Self Test and manual Self Test function

Output

Induced = 131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz and 8,192Hz
Connected = 131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz; 8,192Hz; 640 and 512Hz
Carrier Pulse Frequency: 7.5Hz (pulsed mode)
Connected Mode

Connection Mode automatically selected when lead is plugged into socket
Maximum Output Voltage (open circuit): 30V rms
Maximum Output Current (short circuit): 65mA rms
Maximum Power: 1W into 400Ω load
Construction

Case moulded from high impact plastic.
Designed to withstand 1m (3’3”) drop onto a hard surface
Incorporates clip on accessory storage compartment
Weight (including batteries, Connection Leads and Earth Stake)
3.4kg (7 lb 7 oz)

Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)

Battery Type
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)

Battery Life
up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells

IP Rating
65

Network Rail Approved

Notes
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Transmitters are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/53/EU (EMC). Compliance has been demonstrated by testing representative samples to the harmonised standards EN300-330 and EN301-489. The essential radio test suites have been carried out and the equipment is in conformity with all applicable directives. All C.Scope Transmitters comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).





What's New

Ridgid 92490 P-Trap Cutter Model T-404
Ridgid 92490 P-Trap Cutter Model T-404
£28.14 Ex VAT
£33.77 Inc VAT
Ridgid 92495 Spear Blade Model T-406
Ridgid 92495 Spear Blade Model T-406
£22.60 Ex VAT
£27.12 Inc VAT
Ridgid 92500 Retrieving Auger Model T-407
Ridgid 92500 Retrieving Auger Model T-407
£41.36 Ex VAT
£49.63 Inc VAT