RIDGID Power Pipe Cutter Model 258

The RIDGID® Model 258 Power Pipe Cutter cuts 2 1/2" to 8" schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21' or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.

Features:

• Square cut 21' or nipple lengths of pipe without effort
• Easily cuts by displacing instead of removing pipe material
• No abrasive dust, dangerous sparks or open flame
• Quickly cuts steel pipe with minimal burr
• Great for cutting pipe for groove joining
• Heavy-duty design is perfect for field or shop use
• Adaptable for beveling

Specifications:

• Cutting Capacity: Model 258 2 1/2" to 8" schedule 10*/40 steel pipe
• Model 700 Power drive (Included)
• Power drive RPM: 26-30 (no load)
• Weight: 125lbs (57kg) (Includes No. 700 Power drive)

Standard Equipment:

• 1 x Ridgid 774 Square Drive Adaptor
• 1 x 8 1/2" HD Cutter Wheel Assembly
• 1 x Hydraulic Ram & Foot Pump2 x 2 1/2" to 12"  Ball Transfer Pipe Supports

*Use the thin wall cutter wheel for best results

**Cutting time varies with pipe schedule & diameter.

Note: Models 258 & 258XL are not recommended to cut cast iron pipe. For optimum wheel life always properly support the work piece with ball Transfer pipe supports.

Available Options: